A Guide to Mold Removal and Remediation
A Guide to Mold Removal and Remediation
Mold removal can be an incredibly complex task. If mold in your home covers an area greater than 10 square feet, you are recommended to hire a professional in mold removal to prevent mold damage. Delaying to mitigate mold may translate to an extensive and costly removal and remediation process. On average, mildew remediation and deodorization would cost $500 to $6,000. However, the price can rise to tunes of thousands if commercial mold damage gets severe. Here is what you need to know about fungus mitigation and deodorization process.
Hire a Environmental Hygienist first
If mold spreads to an area greater than 10 square feet, hire an investigator to help you identify its extent. Your local SERVPRO of Downtown Las Vegas can help locate a specialist. They can also help with estimating the cost of the restoration and deodorization process. Even though the mold industry is not well-regulated, there are guidelines to help you find a qualified professional:
• Qualified inspectors should have industry credentials such as Council-certified Indoor Environmental Consultant (CIEC)
• They should have at least one undergraduate degree in a science or engineering field. They should also have completed industry-approved coursework smelly odor deodorization and mold removal
• They should not sell mold-related products
On average, mold inspectors will charge around $200 to $600 depending on the nature of the task. Note that they may open up the walls to find air samples, mildew, and source of the smelly odor.
Steps to mold removal
Before you clean up a wall, you must remember that some molds can be toxic. The Environmental Hygienist uses mold test kits to check which types of mold are growing in your home. If it is toxic, it is recommendable to contact a reputable fungus remediation company even if it is not widespread. Always take precautions when cleaning mold in home to avoid mold damage.
Enclose the area covered by the mold with a plastic to contain the diffusion of smelly odor and spread of spores and dust. Mold in home can be toxic, therefore, always wear gloves and vapor blocking masks. Always turn off the air conditioner or furnace before you start cleaning. You may use ordinary household detergent to clean an area infested with mold and smelly odor. All you need is to wash and dry the surface thoroughly. Remember to check the surface next day to ensure even fine particles are removed. If the surface is clean but still stained, you may need to sand it out or paint it with a good latex paint.
If mold grows unchecked for a while, it can cause more commercial mold damage or home mold damage. Mold’s favorite food is cellulose or organic matter. That’s why it likes growing in drywall. If mold grows underneath a drywall, you may have to replace floor joints, studs, and the attic insulation. You can cut out a wooden surface that you feel can’t be washed off to prevent an extensive commercial mold damage. If you are not confident enough, hire a specialist in mold mitigation to help you remove mold from the furniture. It’s always good to consult a professional mold removal company if commercial mold damage occurs.
There is always the root cause of mold growth. Therefore, cleaning alone may not fully eliminate mold in home. Note that mold needs only water, oxygen, and a food source to survive. Therefore, it is enough for the fungus to grow if one of your pipes is leaking. In most cases, mildew growth is caused by water leakage. A good approach to remove mildew on the non-porous material is to thoroughly clean, sanitize, and then quickly dry the infested surface. It is always wise to consult a fungus inspector to help you assess the mold damage. It would be wise to contact a restoration company if any part of your home suffers an extensive mold damage to avoid further molding.
The time it takes to completely remove mold in home and neutralize smelly odor depends on factors such as the material, location, and the size of the surface it is growing on. On average, mold mitigation may take 1 day to 5 days depending on the size of the infested surface.
Visit http://www.SERVPROdowntownlasvegas.com for more information on mold removal and remediation.